SAND REFINER

PRODUCT

• NSR Series

  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 

  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 

  Crush 40mm raw materials into sand in an instant! We have a lot of experience, especially with limestone materials.

  It is distinguished by its high crushing ratio, which can reduce 40mm raw materials to 5mm or less in an instant.
  
  Since almost all of the input raw materials can be reduced to sand size products in a single pass, you can skip the rough grinding process and the return process of crushed products, making the plant more compact and saving on capital investment costs and electricity.
  
  For more than half a century, our products have been well received especially in the field of sand making from lime-based raw materials such as calcium carbonate and quicklime ( feed, soil conditioner, water conditioner, iron and steel making, paint, glass, etc.).

  

  *1 Varies depending on the quality of the raw material and the Rooster's opening.
  *2 Specifications and appearance are subject to change without notice.
  *3 Only special wear-resistant cast iron grating material can be used for Hammer G.

• EXR Series

  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 

  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 

  Suitable for sharp fine sand production such as silica sand with an overwhelming yield of 14 to 100mesh

  Using pebbles of around 10 mm as raw material, this machine can make sharp fine sand to yield 14 to 100 mesh (1.4 to 0.15 mm), or make peak adjustments on the grain size that cannot be seen visually, like adjusting silica sand No. 5 to make silica sand No. 6.
  In addition, the granulation effect occurs at the same time as crushing, producing an excellent grain shape.
  With the outstanding wear resistance cultivated in silica sand, we have achieved a 90% reduction in running costs by replacing pin mill and cage mill in sand production with limestone materials. We are still increasing the number of replacements.
  Raw materials such as limestone (calcium carbonate), silica stone/silica sand, slaked lime, zeolite, and coke are used to make products such as wall materials, glass materials, foundry sand, wastewater neutralization, soil conditioners, desiccants, ethylene adsorbents, catalysts and antibacterials.

  

  *1 Varies depending on the quality of the raw material and the Rooster's opening.
  *2 Specifications and appearance are subject to change without notice.

• MR-K500 Series

  • 
  • 
  • 
  • 

  • 
  • 
  • 
  • 

  Compact type, less than 5 tons/day For crushing of sand mold slag and foundry core slag

  It is compact and easy to use while maintaining the advantages of the NSR and EXR series.
  As a class with a processing capacity of less than 5 tons/day, it has excellent abrasion resistance and is mainly used for casting to reproduce silica sand and cerabeads (to change sand mold slag and foundry core slag back to their original state).
  Other applications include precious metal recycling (slag grinding) and quicklime grinding (steel making).

  

  *1 Varies depending on the quality of the raw material and the Rooster's opening.
  *2 Specifications and appearance are subject to change without notice.


All-in-one unit types are also available.
The MR-K500 series is a compact and easy-to-install all-in-one unit with a material hopper, vibratory feeder, discharge conveyor, dust collector, and control panel.

*Specifications and appearance are subject to change without notice.